ceramic proppant

Our oil fracturing ceramic proppant can be classified as follows:
1,By the Anti-pressure Strength: 7500psi(52MPa),10000psi(69MPa),12500psi(86MPa)
2,By the Volume Density: Low-density(BL-LD),Medium-density(BL-MD),High-density(BL-HD)
3,BytheSpecification:12-18mesh(1700~1000µm),12-20mesh(1700~850µm),16-20mesh(1186~850µm),16-30mesh(1186~600µm),20-40mesh(850~425µm),30-50mesh(600~300µm),40-70mesh(425~212µm),70-140mesh(212~106µm)etc.

Standard:ISO13503-2/5,APIRP60/61,Q/SY125-2005,SY/T5108-1997
Size:12-18mesh(1700~1000µm)
Sieve:Retained Sieve -18+12 >97.5%
Roundness:>0.89
Sphericity:>0.89
Bulk density:1.60~1.80g/cm³
Apparent density: 2.98~3.35
Crush rate:
7500psi(52MPa)<20
10000psi(69MPa)<23
Turbility:<70FTU
Acid Solubility:<6.0

ceramic proppant